with "a" comes on boot after about 25 seconds tvbild and you can switch to the numbers buttons.

It will only be from the sender / var/usr/local/share/enigma2/szap.channels
used.
those with their own bouquets which records must then szap.channels may themselves produce new!

quicktune can only fta sender NO CRYPT, of course, go crypt but then after booting!

After the info bar is visible, then completed the boot process and to end quicktune (szap)
MUST then gezapped with the key numbers are 1 time and you have run its traditional bouquets and szap quits!

fat thx to nit has this made it all possible!!

understands there is nothing illegal so well by itself!

many thx to TDT and all git-developer/members!!

2:02 Final FTP 2nd USB BL

Original mod UF 910 Image   

2:02 Final 2nd FTP BL   

Description   

Annotated from the original files from Kathrein, provided with a patched kernel, in which the 2nd BL can be installed for BarryAllen.   

• Image (6) files via USB flash drive   
• Wait! The box will boot automatically after installation by 1x.   
• In the menu - Settings own SAT and network configuration file   
• KCC3.2 start. In the Settings tab should at button "Test Connection" has already 4x OK are reported.   
• button "install 2nd Boot Loader". Positive await confirmation.   
• Box and shut off the power switch.   
• If you already have an installed BarryAllen (BA) has the stick 2.02RC, this plug in USB port and boot BOX.   
• In the "BarryAllen" 1x the button "BA press patch. Done.   
• The next time you restart your got your BA then menu.

rev1099-> rev1112    
- Query SCART / HDMI becomes active, 1 = SCART / CHINCH, EXIT = HDMI    
- Translations of the new options in the Tools menu possible    
- Set font in the logo slightly higher    
- Start-resolution changeable    
- Fix audio player (tnx Schischu)    
- Fix Info News / Update Check    
- "Translate" (updated tnx j00zek)    
moved - and radiomode.jpg shutdown.jpg to / var / boot    
- Screen saver list of the audio player is now part of the image viewer currently displays only *. jpg    

For screensaver itself should also be noted:    
- There are currently only *. jpg (ending sensitive) support.    
- There is absolutely needed swap. I had about 30MB of swap in use at about 480 jpg's and 2x100 MB mp3 (2x70min.).    
- It should be in place if possible in jpg's directory only valid, invalid files will be skipped, but costs may be unnecessarily time.    
- It is a delay in the operation, if one expresses precisely when an image is just trying to load invalid or files must be ьberprungen. Depending on the stick / HDD speed may take a few seconds. So not as wild rumhдmmern on the FB. * G * If possible, use a HDD is therefore best, easy times faster than a stick.    
- Are the pictures gone through, start again from the beginning.    
- Images can also right in the operation of the Screen Savers are exchanged. But beware: not a valid jpg Is there more stops the screensaver. This can, however, by pressing a button, for example be [i] (and wait) is moving to restart again.

Git 1131
+ Fix Tuxtxt to 2 Tuner
+ Installer Update (TF7700)
+ Fix remote control and network problems (Atevio700)
+ Fixed Computer icon on VFD Driver (TF7700)

AAF M3761
+ First AAF image for Kathrein UFS-912
PTS + Update Plugin
+ Workaround Modules for ARD / ZDF HD bug (TF7700) -> Thanks TDT
VFD + optimizations (TF7700)
MC + minor fixes
+ Restoring IPK Info for emus, config and SwapIPKs
+ CI Module Workaround (UFS910, IP-Box)
+ HDMI and SCART output @ 576i
+ Update AddOn Manager
+ Channel list updated

rev1140-> rev1145   
- Small fixes in Image Information and Technical Info   

rev1131-> rev1140   
- Fixed PMT update (also in the GIT from rev1140)   
- Fix transparency viewer scaling (though still not possible)   
- Fix HDMI-Standby/Aufwachen on some boxes   
- Techn. Information with bit rate display, display and graphics adapted additional percentage: 100% from 10000 in BER, SNR and at SIG from 65000th   
- FLASH UFS910: / tmp / neutrino as a replacement for / usr / local / bin / neutrino be able to test again possible to experimental versions   

Changelog from rev1086

rev1145 -> rev1150

- PMT-Update Fix2 (auch im GIT ab rev1150)
- Box-Info ьberarbeitet

rev1159->rev1167
- USB/BA-Image: Swapstick (ext2/ext3) kann wie beim Flash komplett verwendet werden fuer Logos etc.
- Behebung von Logo-Fehler in Infobar (Reste beim Umschalten)
- Symlinkfix fьr Moduleinstellungen nach Wiederherstellung der Einstellungen
- UFS910-FLASH: Symlink /logos wie bei USB/BA hinzugefuegt
- Icon fьr Stummschaltung verschwindet nun bei Lautstaerkeregelung

Neutrino by BPanther (STM22 - rev1172a

rev1172 -> rev1172a

- Menue kann mit Jugendschutz-PIN blockiert werden

- Infobar-Option fuer auto-einblenden bei EPG-Wechsel

- VFD-Scolltext funktioniert (UTF-8 nur eingeschraenkt)

- fix: Reste von Menues und anderen Einblendungen entfernt

rev1197->rev1204

- UFS910 Flash: Var update usually possible without a backup / restore,
    as only truly necessary files can be updated
    - UFS910: evremote2 without "Longkey Support" wg. FB-problems
    - Added VFD Display Type 4 for Name EPG
    - Scrolling VFD finally OK, extended to 4 options
    - Faster (Re) Start / Stop the Emus
    - Fix: VOL ad appears everywhere as on-screen display automatically
    - AV700 / 0: disable VOL/PERC/PROC/PROC2 wg. lack of bar display
    - UPnP changes of GIT wg reset completely. various problems

rev1187->rev1197

- / Misc selected as a directory  
  - EPG reset the service menu is available  
  - "PERC-Display" in the VFD can be switched off (representing program progress)
   
  added libplayer2 from rev1175, as new versions can cause problems in  
mpg / mpeg / vob / avi -  
  - Added new PTI driver of the E2 Hotsummer v1 and v2  
  - Added option for PMT update (in zapit options, default is off)  
  - Fix: option for file system check

rev1175a-> rev1187  

- Updated transmitter and Satlisten
  - Fix: Dimmtimeout the VFD now works correctly, also is possible
  - Option to turn off the startup FSCK

rev1175->rev1175a

- /misc als zugelassenes Verzeichnis wieder  
entfernt aufgrund von Problemen mit dem Jugendschutz

Es ist bei rev1175 ausreichend, die Neutrino aus  
Experimentell zu ersetzen, da dort die einzige Дnderung war.

rev1227 -> rev1234

- SatFind fuer Telnet hinzugefuegt
- Image-Status von "Internal" auf "Beta" geaendert
- Netzwerktest mit Domainname und 3 neuen Domains
- Option fuer RAM-Cleaner in Extras->Erweitert hinzugefuegt
- Option fuer AC3-Downmix wirkt nun sofort
- AV700/0: RAM-Cleaner hinzugefuegt
- AV700/0: Standby LED-Einstellungen rot/gelb/gruen entfernt
- AV7000: Option fuer Helligkeit PowerLED hinzugefuegt (Extras->StandbyLEDs)
- AV7000: VFD-Icons HD, DD, TIMER, LOCK (CRYPT), MUTE, MP3 und PLAY aktiviert

Added by sh4 Duckbox Team:

- Fix player CCFLAGSY position
- Add support ifo
- [Libeplayer3] fix in mp4 xvid videostream
- [Libeplayer3] zdf hopefully fixed the problem without destroying streaming playback of other h264 files
- Fix was_timer_wakeup

Added by PKT:

[ALL] PTS channel control fix
[ALL] add smooth infobar pts in Skin Setup
[ALL] Fix memory check
[ALL] channel list update
[ALL] Fix Infocenter
[ALL] EN Set as default menu language
[ALL] Picon update
[ALL] DreamEplorer v6.9 update
[ALL] DMnapi v1.3.19 update
[ALL] add new allienHD
[ALL] gbox start fix
[ALL] DTS Downmix Support
[ALL] New pts MediaCenter
[Ufs910, SF1018] cifs, ntfs fix
[UFS910] Set as default standby power action

--------------------
r760
- Startup scipt code optimization
- Fix / hdd unmounting
- Update PTS Channel Control v1.1: store Aspect Ratio on Each separate channel now available
- Fix WIFI drivers
- Fix PolsatHD HD & others - never hangup if more show up spinner

AAF SVN M8895
      + Auto 3D Mode Switcher (Darstellung vom OSD in 3D auf 3D Sendern/Filmen)
      + 3D-Mode tool um den tv automatisch in den 3d mode zu schicken(geht nur bei sbs) thx hellmaster
      (falls es nich gehen sollte(als beispiel):
      cd /dev
      rm hdmi0.0
      mknod hdmi0.0 c 253 0

      was da angegeben werden muss kann man nachsehen mit
      Code:

      AAF-at700:/# cat /sys/class/stmcoredisplay/display0/hdmi0.0/dev      
      252:0

      )
      + 3D Mode auf (Grьn ->)Blauer Taste
      + Kanalliste aktualisiert
      + [e2 -lng] - add PL.po for aaf panel
      + [mc] Filebrowser
      + [mc] fix imdb background search
      + [mc] vp add default directory devicelist and allowed devicelist lastdir
      + [mc] pp add devicelist default dir
      + [mc] ap add devicelist default dir
      + [mc] added option to remove MC main menu entries! Have a look at Settings -> Global Settings....
      + [mc] readd old myvideo appletrailer pys
      + [ufs912] USB WLAN Support
      + [ipbox] add terrestrial and cable xml
      + [at7500] add terrestrial.xml