Дата: П`ятниця, 25.06.2010, 21:15 | Повідомлення # 6
Адміністратор
Країна:
повідомлень: 28367
Статус:
AzboxHDFirmware
Thisimageis amodifictaionoforiginal0.9.4931 and it is, in a first place, for dummies.
The idea is that dummy, which is usngAZBoxfor a first time, can get basics for normal use of it, without any knowledge oflinux/stb.
InstallingthisFWyou are getting: - new skin, which is, by my opinion, more elegant from the original one; - ch list for the most watched satellites for usals DiseqC motor - plugins: liveonsat, livefeeds, tevee4yu, WeatherForecast, SudoQ, tuxchess_0.2, colorbars, PassReset - CAMs and camreader: Mbox, MGCamd, MultiCAS, CheopsCAS and NewCS (CardReader) by default Mbox and Newcs are active, cofigured to work together, which means that the only thing that you should do is to put your original card in the slot and the image will appear You can choose CAMs by pushing '****|' button You can get ECM info if you push '****' button - font 'telesat_Uni4AZ.ttf' - subtitles have better visibility (space is ok) - Network is set on automatic assigning of network parameters - DHCP After your first restart, on VFD you will get IP address, which is assigned to AZBox - Network services activated: SSH, Telnet, FTP - SAMBA activated and set right - Settings for downloading plugins and CAMs - reset
After you install FW and your first restart, you'll get setup menu. Choose 'TV channel', then 'Tuner A.DVB-S' and 'Antenna Setup', go down to 'Positioner Setup - USALS', press OK and enter your USALS parameters. After you go out from the menu, remove your USB stick, reboot your AZBox pressing POWER button down for 5 seconds. Your AZBox is now ready to be used.
Gratitude goes out to the AZBox4YU team: Chemstar - for the preinstalled plugins iPod - for the idea Roger Rabbit - moral support Mickey - testing Thief - proof-reading telesat - the one responsible for the existance of this FW
ATTENTION : IF update with new FW is succesful - you will get SETUP menu, in other case - pls renew update !
Дата: Середа, 20.10.2010, 15:18 | Повідомлення # 12
Адміністратор
Країна:
повідомлень: 28367
Статус:
Enigma2versione1.0.25perAZbox
Code
Originally Posted by MickeySa Dear friends of this great community, and proud owners of AzBox HD Devices ( currently only Elite/Premium supported ) there is new version of Enigma 2 by the_ripper and team for You :
What isnew?
Code
- FTA SD and HD channels working. ( DD 2.0 , AC3 working by HDMI tested on Einsfestival HD )
- New IR driver ( few more mapped buttons e.g Info button, Audio selection is Check button on RCU )
- Fixed Section filters and PID selection.
- Added part of CA system
- Multimedia support for MPEG2 , MPEG4 ( XviD ), h264, and various audio support.
- Please read ReadMe file if You want also to install additional things to get working Multimedia by Media Player in E2.
- If You have Full HD TV , You can set resolution by editing bootup file located in :
Before loading Enigma 2 , move Your dish to some satellite ( Astra 19.2 e is good because of FTA HD channels ), as on E2 currently we didnt fix DiseQc bug ( We will fix it when we finish Premium+ driver ).
Try to use Simple configuration in Tuner Configuration, e.g choose satellite on which position currently You are.
READMEforMULTIMEDIA :
Code
If You want also to test Multimedia on AzBox Enigma 2 media player , You have to install 3 IPK files located in this archive :
iwconfig ra0 channel 6 ( as my network broadcast on channel 6, in Your case choose what is appropriate for Your network ).
iwconfig ra0 key s:mywpakey (mywpakey will be your network key ).
Result is when i ping it from my pc :
MickeySa:~ mickey$ ping 192.168.1.22 PING 192.168.1.22 (192.168.1.22): 56 data bytes 64 bytes from 192.168.1.22: icmp_seq=0 ttl=64 time=5.569 ms 64 bytes from 192.168.1.22: icmp_seq=1 ttl=64 time=3.591 ms 64 bytes from 192.168.1.22: icmp_seq=2 ttl=64 time=1.501 ms 64 bytes from 192.168.1.22: icmp_seq=3 ttl=64 time=1.637 ms 64 bytes from 192.168.1.22: icmp_seq=4 ttl=64 time=1.649 ms 64 bytes from 192.168.1.22: icmp_seq=5 ttl=64 time=1.738 ms 64 bytes from 192.168.1.22: icmp_seq=6 ttl=64 time=1.533 ms 64 bytes from 192.168.1.22: icmp_seq=7 ttl=64 time=1.795 ms 64 bytes from 192.168.1.22: icmp_seq=8 ttl=64 time=1.754 ms 64 bytes from 192.168.1.22: icmp_seq=9 ttl=64 time=1.649 ms
Thats all, soon GUI version.
This procedure works also with Elite model, which have WiFi stick with this RT chipset
Дата: Неділя, 24.10.2010, 12:06 | Повідомлення # 14
Адміністратор
Країна:
повідомлень: 28367
Статус:
E2 Azbox HDversione1.0.26by theripper
************************************
Dear friends,
Enigmav1.0.26by the_ripperandteam
Attention: Please, before installing Enigma 2 into Your device, read ReadMe file, which is attached with every releases. Use at you own risk, this software in un-official and we cannot guarantee if there’s no possible damage on your hardware.
